Recent content by mpilihp

Thanks for the info, least I now know where they are. The cab design is a problem for sure. THey should make the lower frame of the front panel removeable somehow. I just may do that myself in the process of working on it this summer!

Not sure where the relays are but I will dig into it when the weather gets better, I now have a way to start it for clearing snow.

Hello so I was able to sucessfully start the tractor with an external clamp on starter switch so Im all set for the winter. As for the side cover it doesnt look like taking the rear mount bolts out will allow taking it off with the cab on it so I think I will be trying to take the gauge pack...

The second pic you shared looks like what I can see from my starter. So I will give that a go, applying power to the small red wire to get it started. Thank you all!

Hi thanks for the help, I actually have one of these switches bought awhile ago but haven't used yet, different brand. But my question is on the starter I just see one LARGE red wire from the battery and one small red wire which I am assuming is the wire from the ignition switch to trigger...

Thanks for the DOC!

Awesome thanks for the help!

Thank you for the info, so I understand better, to remove the right side console (where switch) I need to take out 4 bolts, but where are those four bolts? Unfortunately I am not there now. ANd thanks for idea on gouge cluster. As for a replacement switch I see another thread where the person...

Thanks for the help guys, I will take a look at it. Phil

I see another similar thread for the TC33 but I think mine is different. Last time I used the tractor this weekend for snow cleanup it didn't immediately turn over when I turned the key to engage the starter. I wiggled the key and boom it turned over and started. I thought that would stink...

Hello I bought an older Ford skid steer the seller said it was a 370 model but has 340 painted on the side. It was also re-powered by a Ford 4 cylinder LQ motor as well so thats different. It has a bad wheel bearing so that needs to be fixed and was hoping someone here could help on how to...

I bought a used Mott T38 Flail mower and the engine on it is is rough shape. The carb is nothing I have seen before and its leaking fuel everywhere and when fuel is in the take it floods the carb so the float needle valve if it has one isnt working right. I think its an 8hp engine based on...

So Im building a Quonset hut and need to pour the footings, Ive got all the concrete in the garage dry and need to move it to the site but now the tractor wont start. It intermittently started a few times and now wont at all. It appears to be a safety switch that wont let the starter engage...

So my new to me this summer TC35 would not start last night. I had not run it in a week and the temps are bitterly cold, was -5 last night. I had put a mag mount warmer on it and it did not help. Turned over extremely slow. I could also have gelling of the fuel, I will try warming the...

So I broke my cable on the winch, the cable is old and has a lot of broken strands along its length and even has a couple bad kinks in it. So I want to just replace the cable instead of putting a new end on it. I see I can order a replacement unit from Labonville but I've never done it...