Recent content by Mikbe

  1. M

    Another no forward or reverse

    I took a picture of the page from the manual I received with the machine. This is what I got the numbers from. Hope it helps. Mine is a T5B. The 6 I mentioned is not the one that goes to the drive motor it is the one that comes off the tee with the filter.
  2. M

    Terramite hydraulic fluid level

    I don't know what the proper level is either due to mine does not have a dip stick either. When I purchased it from the person I thought it would have a stick. I just look in and if it is about 3/4 full I go with it. Not the answer your looking for, just what I do.
  3. M

    Another no forward or reverse

    Just want to Thank Dart1917 for the replies and the help. Terramite seems to be up and running, reassembled motor and replaced hoses( number 6 and 12 according to parts list) still noisy but have been told they all are. no more high pitch noise and sounding like it is going to fly apart. So 10...
  4. M

    Another no forward or reverse

    Thank you. I am in the process of putting back together. I have a couple hoses that are dry rotted and falling apart. I am waiting for the replacements. Didn't check for collapse line yet just replacing damaged hoses but will check them. The line you mentioned is one that is being replaced...
  5. M

    Another no forward or reverse

    Okay, Pulled pump/transmission today. I have attached the pictures. I cannot find anything wrong with it. no wear or gouges. shaft looks fine, no teeth broke, all needle bearings good and in place. I did pull the return line and fluid drained slow. I removed filter(screen filter) and it was...
  6. M

    Another no forward or reverse

    Thank you for all the help. Guess the first thing I will do is perform a tear down and see what is inside. Had a friend look at it and he says he had a similar problem on a machine and the bell was cracked, keeping my fingers crossed. If I find anything I will try and post pics and where I find...
  7. M

    Another no forward or reverse

    I had time today and checked the foot pedal shaft today. It has a steel square that slides over the pump end. I watched it and moved the pedal and held it with my hand and could not see or feel any slippage in it. I did find a lot of numbers, posted in pics Do I need to call Eaton direct? Or...
  8. M

    Another no forward or reverse

    I first apologize for the novel, 2nd I apologize for the same question. I purchased a T5B last summer. Everything worked great does have a lot of play as expected but did all I need it to do. I was digging 3 foot holes to set posts.( ground is shale and big rocks post hole digger not an option)...
Top