Recent content by mhinch

Been making a little progress lately but the weather and school closings have slowed things down. Work's fixin to get in the way too. No worries, can't have one without the other! I've skinned out the front and made some hinges to replace the hoopie looking cheap door hinges I had on there. They...

Time to get this updated. Been working off and on for the last week but more off than getting anything done. I'd estimate I've got another 10 hours in it. I've skinned out the area above the doors, the back removable panel, shot some etching primer on it, applied body seam sealer to the inside...

Well, I'm back. Been out the last 5 days keeping up with the kids since they've been out of school due to the weather. Chim - thanks for the info. Your cab is very well designed and built. Thanks for the detailed posts in the past. Roy - thanks for the highway 9 link. You also did an excellent...

Well, here goes. After researching and studying various designs here and elsewhere I decided to get started on my cab. I want it to incorporate a canopy as I don't have one now The ROPS will not be removed I have to design in a way to operate the backhoe if need be Doors must be hinged at the...

Here's a picture of it off the tractor and in paint. Note the angle braces that tie into the ROPS bar. I dug 3 stumps out with it today and you could have easily buried a cow in any of the holes and it passed with flying colors. Anyone need a 3 point adapter? Looking to sell the one I replaced...

Converting 3 pt woods 6000 backhoe to subframe mount I have a kubota L2600DT and found a Woods Groundbreaker 6000 3 pt mounted backhoe in Kubota orange for a price I couldn't pass up. I've used it for the past year as purchased but knew it was limited due to the mounting arrangement and finally...

Here's my old kysor Johnson model j I kinked off craigslist fer $300 with, get this, 100' of 10-14 tpi blade to go with it. Glad grandpa taught me to silver solder! Best to get manual from web somewhere. Yur probably right on hydraulic cylinder (make sure all fittings and plugs are tight). Do a...

Not many pictures of the L2600DT out here so figured I'd post mine up.....

Made this out of some scrap Trex decking and #9 wired it to my spreader mount. This makes for toting the saw into the woods so much easier.

Here's the butter that holds the bread together........

Took this idea from another member her and wanted to post it up for all to see. Special thanks to BX 24 for the idea.