Recent content by MCKS

Just thought I’d update. Baled 40 acres and brushcut 20. No issues as of yet. Thanks again.

Hey guys, While I fully agree that the pump needs to be looked at by someone who knows what they are doing. I also fully agree that I shouldn’t have opened it up. I did know about the timing marks, Ive been through that before on my Allis. Once I got into the pump, I was lost. I also cant...

Watched the video again and seen where the two are together. Now just big hammers and chisels right?!?

That helped tremendously! Control rod is for sure stuck. 1st and second from the front injector plungers are stuck in the up position. I have the pump off. The back partially separated. I cannot move the control rod. (Did not try very hard.) Logic would say its the one that’s stuck one’s...

Found them and have them set lined up together. Did not have the cover off at that time so I cannot verify that #1 was starting rise. But i have dis-assembled yet so I can do it again. #2 spring is not broken. Must be the camera angle. Still cant seem to see what the shut off lever should...

Any advice on where I could find a manual or diagram on the pump? The manual for the tractor covers removal, but nothing on the pump itself.

Yes it is current. I do not have all of the mounting bolts off. My son started to remove the pump at his grandpa’s direction. I stopped him before he got all the way. The rear (between the pump and engine) mounting bolts are still in. The gear hasnt been touched yet. Everything is still in...

Ok. Nothing moves at all inside there when I operate the shut off lever. I’m not sure I understand what should be moving? The segments operate up and down by cam correct? What does the shut off lever control? Little different setup then my old Allis.

Thanks for the advise. But it appears I’m a little lost. Removed the two 10mm bolts. But I’m guessing this is not what you were describing. Am I looking in the wrong place or is this a different pump than you assumed I had?

Thank you, I will check it out this evening and let you know what I find. Also appreciate the advise on the shut off cable.

I have a Case 1370 White tractor. Borrowed from my in-laws. Don’t know a ton about it. Ran it out of fuel. Spent a long time getting it fired up again. Ran perfectly fine while we bailed 10 acres. Parked it for a week and it wouldn’t start again. Came back a week later, still wouldn’t...