Recent content by MBMassey

Hey Gents, I bought a new holland 1002 bale picker this spring, and now that it's time to use it, it's breaking more bales then picking. I'm picking the same way I bale and my 1/4 turn chute is dropping them the right way, but first the bales would hit, pull up and then catch the twine on the...

Hey Gents, It's been a bad couple of days on my first ever attempt at putting up hay, first I couldn't seem to get the baler to make solid bales but with some messing around and speeding up I got them to start spitting out semi ok. Then once I really got going the needle on the l/h side decided...

Hey Gents, It's been a bad couple of days on my first ever attempt at putting up hay, first I couldn't seem to get the baler to make solid bales but with some messing around and speeding up I got them to start spitting out semi ok. Then once I really got going the needle on the l/h side...

The rev limiter should be right at the front, unfortunately it's actually located inside the timing cover...but you can play with it with the lever that should be attached to the linkage from your throttle. The throttle goes to the rev limiter and then from the limiter to the carb....so start...

Rev limiter acting up? if you very slowly try to up the RPM's will it keep going?

Hey All, I'm rebuilding my 64 Massey 165 with the Continental Gas 4 cyl and I just opened the package with the sleeve and piston and it's a completely different piston then the stock one.....stock is a flat top and the new one is a domed (raised portion on top) and it is taller by almost 3/8's...