Recent content by Mark_in_NY

The lower radiator hose on my G-194 (TS1910F) sprung a leak and I thought I'd be cute and replaced the hose with 3/4" copper (same exact size as the radiator connection). It worked really slick. I cut off the old original hose ends ands used them to connect the copper to the radiator and water...

I need a nudge from the masses to get my problem solved; I have a G194/TS1910F w/backhoe. When I got this unit the hydraulics were strong, enough so that I bent one of the cylinder rams being stuborn (that's another story but evidence of the power) but over the last fews years the the tractor...

480E LL Construction King: I rebuilt the shuttle unit 2 yrs ago when teh Bellville spring disintegrated. Did a total rebuild with clutches and the works. Its been working great since until this spring. Its developed a jerk or lurch as it comes to a stop now. At idle the tractors movement...

I have an engine from my parts tractor, TS2210, that I would like to put to use in another application. Are there any transmisions from other applications that will bolt up to that block? The tractor transmission is either impossible to find or prohibitively expensive.

There's a very long story as to why, but I find myself working on a tractor 600 miles from my service manuals. I have to split the tractor (G194/TS1910F) at the engine/bellhousing joint and I'm having some difficulty with the driveshaft to the front axle. What is the procedure to remove...