Recent content by Macinnis

It didn’t break of, but it was slightly bent, which allowed it to come off.

I *think* the edge of the mower was being pulled to tough to one side of the other. I have a lot of en even ground, mostly terraces. I initially thought I was losing the roller due to turning to tight and or the terrace issue was catching a side. Again, hydronic top link, so it’s not going...

I have a flail mower question, but first the details. I have had a woodmaxx flail mower for about 4 years now and it has been great. About 2 years ago, the roller came off and I got it repaired, no big deal. A month ago it came off again, but this time I know what I did to cause it, so lesson...

I have an mt357 as well. I usually run it at pto speed flail mowing. I have 180 hours and have regenned at 50, 100 and 150 on the nose every time. The one thing my dealer told me was to run it at high rpm: “these machines are made to work” More fuel? Sure. Any complaints, nope. Since it...

Thanks!!!

125 hours or use, garage kept…runs like a top. I greased everything up yesterday, blew out the radiator and went to work. it was cool out, so it took a while for me to turn the ac on. When I did, I noticed it was on setting 1, but no air was blowing out of any vent. Moved to setting 2, still...

Well, the milky spoor stuff worked well. I did the first application in the spring. By mid summer, no moles in back yard. They did enter the front yard, which I didn’t treat. so I have no doubt treating problem areas three times a year for two years should get rid of them. At least I hope.

Found a few new app recipes that turned out amazing. take a half slice of bacon and wrap around a trisket, smoke for an hour or until the bacon is crisp. They are amazing by themselves or with dip. second is to take some manicotti shells (straight from package, no boiling) and stuff them with...

Do you know how much a household needs to make to be in the 1% category? It’s not as high as you would think.

Welcome to tbn! I bought 50 acres of pasture 3 years ago and started here reaching what size tractor I would need just to cut the pasture. I thought a 25 hp tractor would be fine, but after a year of reacher on this site, I settled on a 55 hp tractor. I wound up buying a 57hp tractor as a new...

They never said anything that you implied.

I love the concept, wanna build my retirement home with sips.

they don’t really care if you have less then a box. If they find an actual cigar box, they may investigate. easy way to get them through customs is to just take the bands off, no way to know they are Cuban then. If you do buy a box, ask for a non Cuban box and just remove the bands, put in...

Based on my research, the bathroom exhaust fan only needs to be on it’s own circuit (20 amp) if the fan also has a heater. will you have heaters? Curious if that is the issue. I have been researching this quite extensively as I am going to start my wiring as soon as it warms up a bit. also...

I had an error code once on my MT357. Turns out the super tall thick briers I was cutting with the flail mower had tore a wire out. I reconnected the wire and zip tied it out of the way, that was the only error code I had. It regenerated right at 50.0 hours and I didn’t even notice it (other...