Recent content by LouieJunior

Yes, that is correct -- 4052R I fixed thread title...

Thanks - If that is what it is, all I am missing is the female threaded ring to tighten it and hold it in place. My reverse beeper still beeps.

Hello - I was washing my tractor this morning and discovered a damaged connector. I don't know what it's function is. Everything has been operating okay, as far as I know. The connector is at the rear of the tractor - behind the seat, inside the left rear wheel. Does anybody recognize this? It...

New $175 Battery resolved my problem. I had to modify it slightly to fit it in. The little ridges were different than the original one. Thanks all for your help!

That shows one of the worklights. Headlights are built into the grill and everything supposedly separates via wiring harness some distance from the lights themselves.

I'm trying to chane my battery now. How frustrating! Worst Design EVER! The side panels have been removed. The front grille has been unfastened, but cannot be removed untill the Headlights are disconnected. I cannot uncouple the headlight wiring harness. Is there some magic tric to this task? I...

Thank you all! I hope you are correct about the battery! Trying a new battery is a price I am glad to pay. One additional clue - The work lights won't turn on now. Prior to this, I could turn them on without putting the key in the ignition.

Sunday morning I started my JD 4052R. I planned on doing some mowing. I manuevered it to remove bucket and turned off engine. After doing so, it failed to start. It has never failed before. All I got was some clicking noises. All the dash lights illuminated but not nothing turned over. I tried...

Yes - exactly. Need to purchase male couplers compatible with this tractor.

My brother purchased a used JD 5045 and needs to change the male couplers on his rear hydraulic top link -- Does anyone know what to purchase? A picture is included.

Thanks all for your input... I do think it is a combination of debris buildup and overworking the machine. The flail mower does get bogged down in tall, thick grass. This weekend, I will attach the Woods rotary cutter and see if the tractor performs better -- keeping close watch on the temp.

Background: 2 weeks ago, after mowing a few hours, I got the "Engine Over Heat" warning on the dash. I quit mowing and put the tractor in the barn. I have never experienced this before. The coolant level was fine as was the engine oil level. I wondered if the air filters were dirty, so I...

Low flow for this device. Manufacturer recommends flow restriction to a point where user can see teeth moving when engaged. Guessing 2 gpm.

I have a shaver SC25 Stump Grinder. It would stall my old tractor with 41 HP (JD4105). I would NOT recommend using this implement on a 32 HP tractor. This is the one attachment that needs lots of power. My new tractor has 52 HP (JD4052) and the additional power makes all the difference in the world.

I have a shaver model PTO Stump Grinder. You'll want two remotes and a swivel seat. Each of your pine stumps should take less than 5 minutes.