Lineman North Florida's latest activity

Some good before and after pics of another lip removal today.

More work at LSU - A today. We added 2 loads of infield clay and laser graded the softball infield.

The last sentence sounds like the best idea, the only better idea would be for them to be loaded with all of the owners stuff and never...

I think the only option with a lower flow or pressure machine behind a rotary hydraulic tool is to rely on inertia. Reversing the 2...

If I decide to do it I will get a RPM tach and see what it is before and after swapping the pulley's, but it makes sense once you think...

If there are any farmers around you, you can bet that they know how to do it and can show you so you can do it in the future, as it...

Well for starters I have to buy an RPM tach to see what it is, but I should be able to figure out how to swap the pulley's , I just need...

So out of curiosity how much trouble is it to swap the pulley's, I'm guessing it's pretty simple/straight forward.

Oh I forgot to mention, when I did my checks on my RPM's I was running my machine @ 2500 rpm's

The fuel runs out under the cap. I should say, you are bleeding the air out of the filter, so run the fuel out from under the cap until...

I emailed them at the email address that I gave you in an earlier post and they sent it to me. I don't know why, but none of them seem...

According to my owners manual you are just under max rpms which is 2100.

Alright try this email address as it is the one that I have gotten all my responses from. service@raymondy.com Now you got me wanting to...

Sorry, I have no idea, I just hooked it up and have run it on low flow on my Kubota SVL 75-2 which is a little over 17 GPM . Not real...

Ive now managed to hook the raytree REDM32 onto my excavator & ran it for a full day. It did a good job of dealing with a lot of...