Recent content by KubotaToy

None.

After 6 months, I have landed on 12 psi for a good tire pressure on the R14s for all around use. I have a cab LX3310 with loader and filled tires, most of it life with be a pasture lawnmower, field brush cutter and occasional barn stall scooper...

Well, I do not stick the hose end into the tank space or near the oil but I just set it in the opening and either use a shop towel to wedge it, tape it in place or use my assistant if she is available. On my tractors, the oil is a good 8" below the fill ports and I've had the vac hooked up for...

I bought one of the boom sickle cutters from Bestco earlier this year, other than the hydraulics being hard to control with fine movements, it functions as I thought it would. It cuts stuff up to 1" easily and up to 2" if you go slow. I bought to keep the fence line trimmed, overgrowth on my...

I have used the "shop vac trick" many times on several different tractors with no problems. I actually saw this being used in a JD tractor repair shop back 25 years ago and asked the mechanic what he was doing and he explained the process, been using it ever since when I just need to swap...

Had a similar thing happen recently with a new startup small business that did heavy advertising in the local area for small engine service. Thought I would throw them some work, took a couple of mowers in for service. They looked legit and had about 50 sitting around their shed and seemed to...

CD, CE or CF are all obsolete and replaced by CK-4, CJ-4, CI-4 or CH-4 which I am pretty sure Rotella T5 meets. I have no problem running any Rotella diesel oils in any of my tractors, trucks or equipment and I do (T6). Take a look at this site... Oil Service Classifications

jeff9366 stated it pretty well.... last October I negotiated a good price on a LX3310 cab that was ordered and I was able to get some free lights, bucket edge and 3rd function remote but no hat... After waiting 6 months for my tractor to come in, they called and the tractor was in but still in...

☝️☝️☝️ Hit my head a few times on the cab roof getting in but wear my seat belt at all times, good habit learned from experience turning over an excavator that gave me a concussion when I was thrown into the side window and cab. I also hit my head trying to lean over to see where the rear...

I have both, but had open station tractors for 40 years, bought my first cab tractor two months ago. Now, I wonder what took so long.

I have a stand alone 20 ton splitter that pull behind my RTV when needed. I like the convenience of not having to get the tractor out and hook up a 3 point implement... Back the RTV up, drop the hitch, load my gear in the back and head to the wood pile... I use mine several times a year and...

This!!!! 👆👆👆 I tried what you want to do a few yeas back. It took two years to get it out of my system... I had about 25 acres of level pasture around the house and no livestock on it for a few years so I had a good stand of grass hay. Had been buying about 200-300 bales of hay to feed my...

Was not denied warranty but had CAT take oil samples and confiscate my filters off a new excavator after a pump failure that took out a lot of parts with it. Of course their first root cause was I used the incorrect oil and filters as they seen that before in this type of failure, but they...

If I would have known back then what I know now, I would not have wasted my time with 6 different tractors (25hp to 100hp) over the past 15 years. I have it balanced now and I would have all with cabs if possible, so much nicer in the heat and cold with a cab. Right now, I have LX3310 cab...

Just got a new tractor for the wife and let the dealer talk me into R14s, must admit they looked good on the tractor. Always had R4s which works 99% of the time for the work that she does with the tractors. Only time R4s did not work was in snow and deep mud which I do not experience very...