The three point hitch on my B7100 will not "feather" when raising. As I start to raise the lift handle, it makes an awful noise (like a dead-end hydraulic circuit) until I pull it to the full up position where it then raises normally (but at full speed) .
this is not a big issue for mowers /...
I have recently purchased a Terex PT 80 with about 1800 hours. The machine works well, but the forward / reverse control is sluggish in operation. This gets worse as the temperature drops to the point where it seems like a time-delay from control input to movement starting (or direction...
I heat with wood through our long Northern Michigan winters and am always looking for ways to to make the chore of cutting wood easier. A few years ago decided that I wanted to try a buzz rig, and after looking around at plenty of beat-up antiques and researching the few commercially built...
My B7100 HST is equipped with a hydraulic diverter valve to switch the hydraulic flow from the internal 3-point hitch cylinder to an external use. My question: is this port live or is it controlled by the three-point control valve? Also, the manual makes mention of a return port, but I am unable...