Recent content by jrogers

I looked at the holes closer, and the back one was definitely elongated. I filled it with my mig welder and redrilled it so that it is tight now. I also rebolted it with a new 1/4" grade 8 bolt with a longer shank so that the shear area is not where threads are. It looks like more snow this...

I have tried putting the bolt in both directions with no difference in time between shears. Here is a picture showing that it is shearing in the threaded area. I think the two tabs are the same basic thickness, so I think it shears at the same point whether it is put in from the front or the rear.

Yes, I have the updated shear bolt setup in mine: Here is the bolt in the package from Kubota: The total distance of the two flanges lined up is around 3/4". The thread on the bolt could be 1/4" shorter in my opinion. And here is the head of the bolt. This is a grade 8 bolt, right...

Here is a picture of a couple of the many sheared bolts: More interestingly, here is one that was in the tractor for about 10 minutes: You can see how it is already getting beat up. Looking at the tab where the shear bolt goes in, it is a bit loose, especially the back tab. I tried...

One more thing, the U joint at the gear box as a little loose and had a bit of wobble to it. I tightened down the set screw on the side and this quieted things down a bit, so I will see if this will help. I did one pass of some drifted snow this morning and no shear failure, but only about 10...

The U joints appear to be in phase to me. I did not see any other problems. The gear reduction seemed to be fine. There was one long bolt on the side that was loose which I tightened, but in general everything seems fine. There is a little play in the front U joint to the shaft, but not very...

The snowblower is a 2782. Attached are photos of it as well as the bolts that I got from the dealer. I filled the gearbox as suggested. It was maybe 25% down. The fan spins really freely when there is no shear bolt in, and the shear bolt fits really tight. Let me know if you see anything wrong.

On my first plow of the year I went through a couple of second stage bolts on my Kubota snowblower. I thought it was from the wet snow, but today we had 6 inches of dry snow, and I went through 3 more. I did not see that I was hitting anything, it seemed like if I even loaded it up much they...

When blowing snow I use the float indent, which generally works well. Occasionally it clicks out of the float position. Is this normal, or a problem. If it is normal, why is it doing it. It seems I can just press it back into float again and everything is fine. Sometimes it does it repeatedly...

Ok, so I made it thought my initial teething pains with the new tractor (B2630) and snowblower (63 front mount) and all seems to be working well now. Thanks for all of the help and advice I received here! Now that I am running, I just had a few questions so that I don稚 screw things up: 1. Is it...

I have a B2630 with a 63" snowblower with a quick hitch. I bought it used this summer, with around 100 hours on it. I put the quick hitch and snowblower on, but the drive shaft does not seem to fit right between the mid PTO output and the quickhitch assembly. It fits fine at the rear where...

Hello, We just got our first real snow, and I have some questions on my snowblower. It is a 63" two stange front mount on a B2630. We are building a house, so it is currently a new gravel driveway. In preperation for this, I changed the skids to put the blower in it's highest position. Do...

Does anyone else have quick disconnects that leak? They don't leak bad, but just drips that are annoying on the garage floor. I am wondering if there are any tricks to stopping little leaks like this or if changing out the quick disconnects is worth while. It seems like most of them leak a...

I have a 2630, and would like to add a backhoe. The local dealer wants around 9K for a BH76. What are the chances of finding a used BH76 and shipping it? What issues would I have, or what would you watch out for.

I recently found this forum, and it looks like a lot of good information here. I have a Kubota 2630 that I am planning on thowing some snow with sometime soon! Jim