I haven't been overly happy with the performance of my loader so while I had it in for some warranty work I had them check the system pressure. It was around 1,500 psi, <font color="red">well below </font> the upper end of 1,850 psi as stated in the service manual. 350 psi translates into a...
I was at the EAA AirVenture and saw the new 46 subframe mounted backhoe. Looks pretty good and appears to allow the use of a MMM when it is not attached. I totally forgot to take pictures, I'm not use to having my camera with me, sorry! They also have new subframe mounts for the 42xx and the...
Does anyone have this combination and have some pictures of the subframe mounting? I'd like to see how this hoe is attached to the tractor and if it would interfere with a MMM.
Well all the parts for the rear hydraulics finally came in(took over a month) and I just finished installing them on my BX2200. The parts came to a total of about $160.00. These are the parts that are on the BX22. I installed the rear hydraulics because I made a 3-point backhoe and log...
Next to the spools on the valve body there is a plug which I removed to see if that was where the relief valve adjuster was located. It was not so I screwed it back in but now the loader doesn't work. Since this is an opencenter system any air introduced should bleed out by itself. Any ideas?