jonsstihl's latest activity

if you are close to canada, I think it is quite a bit cheaper here. but its been a while since I looked up prices

i noticed my 5Gal pail of kubota sudt2 mentions that it meets J20d spec which is the john deere low vis Hygard spec but I still haven't...

allen sounds like an AI bot, I've noticed a few responses like these in other threads always from new members with less than 10 posts...

interesting. If you look at the specs the 854 and the la1055 are very close in capacities, kubota numbers their loaders according to...

maybe its deleted...... 😮

I just bought 2X2 that are 1200lbs for 30$ CAD. the 2X4 blocks are 40$ 3600lbs makes more sense. concrete is around 150lbs per cubic foot

that is definitely some debris and the fact that is does it only going uphill could be bacause load increases but it could also be...

Congrats on the saw mill I find it easier to be gentle with the forks than my grapple. just drop the forks in between two bunks and the...

the PXPL technically can clear snow while driving forward but its main use is to be able to pull snow away from building much closer and...

If you want to really invest in a snowblower and need less precision in where the snow actually goes. they make models with a rotating...

I run an 80 inch PXPL on my 4740 and have no problems but good thing it is HST. wet heavy snow above 12 inches will be a problem but I...

My John deere X758 shuts off the PTO when it gets too hot. That gets your attention real quick. then you glance at the gauges and...

where are you sourcing your kubota filters? Amazon..... or a reputable dealer that would not keep old stock.

It's a grass runway for aircraft to take off and land on, there better not be any animals grazing on it ;) hope its not corrosive...

I don't think it is a gear pump so the flow will not be steady you should get pulses of fuel due to the design of the pump.