John_Mc's latest activity

Topic drift is a way of life on TBN.

I’m a pilot (and former flight instructor). I also used to work for a company that heat treated steel wire by running it through molten...

@grsthegreat - are you aware of any non-inverter portable generators that are still made that have decent power quality (good enough to...

If it's anything like my Honda EM6500-SX, I suspect your electronics run on it just fine.

Not all portable generators are like that. You generally want one where the THD (Total Harmonic Distortion) is less than 5-6% if you are...

Around here, they are both: dig out the water bar, and pile it up on the downhill side.

But in that example the issue moved with the lines, it didn't stay with the valve. If the issue is with curl not working and you move he...

Maybe I'm just not following your description, but if the problem follows the lines, doesn't that mean it's not the valve? If curl down...

I'm trying to think of something more substantial than T posts to use as supports. They are not designed to support any significant side...

I wonder if the PTO shaft for the MechMaxx SG24 stump grinder would work. They sell the PTO shaft separately for $160 with free...

I do like the large, easy to grab knob. There would likely be no problem finding it during an "Oh S*%t" moment. The concern is that...

I have a Tekonsha P3 gathering dust - removed from our minivan when it was finally retired a month ago. I'm not worried about the lack...

The problem is that a standard electric brake draws about 7 or 8 amps per axle. I've got brakes on all four wheels, so my trailer could...

Where are you finding brake controllers for CUTs? I've been looking for one for my NH TC33D. My log forwarding trailer has electric...

I have two Husqvarna pro-level saws and a Jonsered "pro-ish" saw (pro construction, magnesium case, but not billed as a pro saw). I've...