Recent content by joebandit

You are not going to like the price, I bought two from amazon for about $30, better than 500

Check the fuel pump, my boomer 35 did the same thing until i found water in the filter. Then it would run for a bit and quit.

If you live in Oklahoma and use Central New Holland, let me forewarn you. the tech named Kyle gave me some bad info about my starter connections, cost me a bit over $400 to replace the saftey module and the fuel shut-off solenoid, They didn't offer to defray some of the costs. The way I finally...

Could some kind soul that has a boomer 30/35 remove the plastic cover on the starter and send me a picture please. I took my starter off then forgot how the small wires went back on. The dope in the ckosest dealer told me wrong and it burned up the fuel shutoff solenoid. That has been replaced...

First goto your local steel shop and purchase 16" of bar stock, 1/4 x 16 for a pair of them. Drill a 1/2in hole close to one end and attach it to the tractor, then slide the 3 point piece onto the bar and mark it for a 3/8 in hole for the bolt. I used a grade 8 bolt. You can move it wherever...

It would be appreciated if someone on here that has a tc35 with the guard already on it and could post a few pictures of how it is mounted, especially with a tl240 bucket assembly. I know someone who is a very good welder and can make me one. Probably for a lot less than the dealer wants.

Can someone point me in the right direction to find one. I don't feel like giving NH $100+ for the trailer connector, when one can be had for under $30 from walmart and various other places. Even a copy of it from a repair manual would be good. There isn't one in the owners manual, which my...

I live in SW Oklahoma, retired Army Veteran and I just found this forum the other day while searching for a wiring diagram for my new TC35 tractor. Been having fun with it and getting aquainted while I figure out what it can and can't do. I can run a dozer, but this bucket thing is new to me...