jimjumper's latest activity

New block made no difference. Jumper made no difference. I am hesitant to test across the cut-out since I don't know what it will do to...

Since it was idling well before the new carb, I went back and put the old one back on. So, I am at the same spot as I started. Any...

Also with the "new" carb it just barely idles and runs with the jet set 1/2 turn out. if I turn it out further it makes no difference...

If I jumper'ed across the resistor would I be able to tell if the voltage to the coil increases? I realize that would be hard on the...

This is exactly! how the wiring is currently. Since I don't have headlights there are only 8 wires total. I have taken pictures and...

Put the new carb on it but while it made some difference it still starts to run rough under load. I put a spark checker on it and...

Damn, I hate it when I'm stupid! I was using ti mowing with it running fine and hit a big squirrel mound in the brush. Tractor quickly...

I think I've solved it. Since uphill backwards was full power that would eliminate the tank and fuel line. Same with the carb fuel...

Filled it with gas and no difference. It did have 3.5 gals so i don't think that was it. It has a brand new gas tank but I used the old...

I checked the floats and they looked fine. Throttle linkage and governor linkage looked fine. Put it back together and went to drive it...

My 8N, front mount distributer, 6V stumbles on the slightest uphill and will die if the incline is steep enough or long enough. Nothing...