Hi Guys I'm back with another question,
I'm ready to put my backhoe back together now but I'm not sure where # 17 spring come from because it was in the bottom of the transmission.
The end of the shaft # 13 the corner of the plate was broke off at the end so I welded it back on and it has a...
My forward clutch drum outer shaft is worn down some because the snap ring broke for whatever reason and the clutch pads are no good so I have to get new clutch pads and plates and I’m going to see if I can get my drum welded back up and machine down to the right size again and I was just...
Well I got the clutch packs out today and the reverse pack isn't to bad but I will still probable change them because I have them out.
I took the Forward clutch pack out and it is bad' 2 clutch pad are burnt up and the 3 one is all most gone and the plates & big washers are burnt and warped.
Ok I had a chance to split my backhoe and I'm going to take a look at the clutch packs but after I split it I notice the end of the gear shifter shaft has a peace broke off the notch where the shifter goes in would this stop the backhoe from moving forward or do you still think it's the forward...
Hello
I'm new to this forum and my name is Jack.
I just picked up a John Deere 410 Backhoe and it worked ok for a couple days and now it will barely move forward but it moves ok in reverse.
I called the guy back and he said that he broke a hydraulic line and he replaced it and it work ok before...