Was not simple. Had to use heat and a come a long, tractor hyd and board would not move is per video. Fixed now. You don't know how much nyou helped me. THANKS
Yep That’s my problem Bar showed no bend at all but a bare little turns into a lot at the top of the plate I sure am proud I don’t need a new cyl. Thanks and thanks again! I had tried to force the bucket on with a come along No way
After about 10/15 hrs trying to fix a similar problem on my 4025, my guy drilled the hole a little larger in the shut off valve. Problem solved except for all the hair that was pulled out. I do have all new lines and a clean tank trying to fix this.
HELP I was pushing brush and somehow the bucket release lever got puled on one side. It looks like I may have bent the cylinder rod or something. The left cylinder lacks about 2 in retracting all the way in. Works fine other than that. Can't get the bucket back on no way possible. Need some help...
Somewhere around 74/75, I bought a new Marvel tree cuter. I think that Brown is that now. Paid 900$ used it for anything up to 8 in trees. Sold it for 1500$ in 05, looked really bad bad. Guy was happy because new was around 4000$. Every once in a while I wished I had it back. Like someone said...
All my life I poured fuel out of 5 gal oil buckets with the open end on the bottom, till I saw a guy pouring hyd oil with the open sprout on the top, never spilled a drop and never starved for air. For a long time I put a drum on a bout 6 ft high rack and let it drain out. Now its too much...
My fence around my garden is only about 8 in high, been doing this about 20 yrs, no deer problem and I live in west central AL deer country. It works for me and that's what counts.
Brown Tree Cutter, Look for used. Had one years ago on a 135MF, if you are careful they will down cut 8 in, I almost cut a power pole down before I could stop.