Harry in Ky's latest activity

So what's the hold up?

The fact you replaced the control valve spool with an aftermarket part raises questions. Why did that need to happen? While...

You really need a more accurate description of the problem. People have different ideas of the term "won't turn over". So the warning...

I'm no authority on computer controlled tractors, but if it's a common sense fuel system, then what would a computer have done before...

I doubt it's the wheel coming loose on the shaft. More likely the shaft is slipping up the column and coming free of the steering valve...

If you decide to try what I did, be aware there is a screen in the tank below the filler hose. I had to remove the hose from tank to get...

In fact, I put a pump on the Kubota engine I just installed on another machine. I never cared for Bobcat's idea of the primer bulb for...

Just tied it to the fuel shut off solenoid. Key is on, shut off solenoid is on, pump is on. Simple.

Well I don't know about "simplest things first" in all cases. We all do things in our own way I guess. I look things over first before...

It's not a tandem pump. It's two separate pumps on a tandem drive with a common suction. There is (probably) a mid mount loader valve...

I'm not sure why you would suspect a suction leak as both pumps share a common suction and the steering/transmission pump seems to work...

Any other ideas? Here's one. Does your fuel shut off solenoid have a single pink wire? If so then pull the instrument cluster out and...

You're just running in circles with what you're doing and wondering what to do next. What you need here is a flow meter, not a...

I went through the "fuel pickup" thing on an 863G not that long ago. I found it impossible to reach the fitting on top of the tank. My...

I would lean towards a restriction of fuel exiting the tank. I think the old "compressed air into the supply hose" trick would be next...