HaplessKiotiOwner's latest activity

When you tested it with a wire, you did get power from the bottom terminal with the battery cable, correct? That should have activated...

I have the same issue right now with my cabbed HST NX. I had the hood up, it rained, and now no start on the ignition switch. To start...

FWIW, a guy can bench-test a solenoid with the starter removed, and it will work, but it will not work when under a load. FWIW, I see...

Eric, just a point of clarity, if you use a screwdriver to jump the big terminals you are essentially bypassing the solenoid and putting...

By jumping battery hot (the starter has 12v positive) to the solenoid, you're asking the solenoid and the bendix to work. If the...

Glad you found it, I was going to suggest this, as the only electrical problem with my tractor has been a bad positive lead. Replaced...

The issue has been found and resolved. Here was the process, and I feel stupid after finding the issue. So utilizing my father who...

Good to know. The only thing I didn't do is have the key in the run position. Per my other reply my father is rigging up a remote...

Correct, I did get power from the bottom terminal with the battery cable. I didn't even get a click, so it sounds like pulling the...

Greetings and salutations, My 2015 NX5510 manual open station has failed to start for some time now. It last started in late...