I recently purchased an Oliver 170 (I believe it’s a 170) and it is missing the drive gear parts. The triangular “gear” off the driveline is there, as well as the gear that drives the gear for the conveyor on the bed.
I very much appreciate your help. This tractor has been converted to an alternator. Yes, you are correct as the relay did not work (fortunately I had one already). I’ll get back on it today. Thank you to all who have responded.
I put a dry contact in to break the connection to the primary side of the coil: Did not work. The only thing that seems to work is to physically remove the primary coil wire from any connections. It seems the relay I installed is still allowing power to “bleed” across the open contacts. I even...
I replaced an ignition key switch with the original 5-terminal switch. I think I may have shorted something out while troubleshooting the switch as the back light on the seat was not getting power. Now the tractor will not shut off when I put the switch in the off position. Removed all the...