Recent content by gkevin9

]

Wanted to run this by you guys before I pay to ship off to the dealer: This summer, my 2009 4720 has seemed to be "dragging" the few times i have used it. Top speed seemed to be down (would'nt get over 5.8 mph in B range). It also seemed to run hot. Not the engine temp, but the trans. I...

I am considering buying a Deere 4720 with 400X loader. All movements seem to be tight except when tilting the bucket down it will not stop immediately when you bring the control stick back to dead center. Instead, it tends to come to a slow stop, moving another few inches. Is this a matter of...

Thanks in advance for any replies, I am considering a 2008 4720 with 1150 hrs, 4X4 hydro, open station, 400cx ldr, bucket, 3 services on the back and hydraulic top link. This machine was used by a landscaping company where it's main job was to put in lawns, run a rake , etc. The R4 tires...

Thanks in advance for any replies, I am considering a 2008 4720 with 1150 hrs, 4X4 hydro, open station, 400cx ldr, bucket, 3 services on the back and hydraulic top link. This machine was used by a landscaping company where it's main job was to put in lawns, run a rake , etc. The R4 tires...

I've got a 2010 that will need an engine overhaul. Trying to decide if it's worth the cost due to the fact that half of the forward gears are out. Any idea what it costs to rebuild the Syncro or if this is a common problem that may be an easier fix? Thanks.

Has anyone had any experience with a rebuild on a 60's 2010 gas engine (I4)? Mine's getting very weak and smoking from the down tube. I put a call into my dealer and he ballparked a rebuild at $4,000+ !!!!!! Does thast sound right??