gengine's latest activity

A fully charger 12v battery should test at 12.7v-12.9v. The charging system by way of the voltage regulator should be testing between 13...

Voltage regulators are almost always wired hot. Meaning not switched. The VR is suppose to shut down the path. If you unplug your VR...

Thanks for the reply Ponytug!

I don't have chiggers here, so that never crossed my mind. Glad you got it together, hope it was the fix.

Yes, you are exactly right. It was bear to get everything off to get to the o-ring but it was just as difficult to try to get it back...

I thought I had an oil leak, and it was the dipstick rubber plug not sitting in the dipstick tube all the way. Oil splatters out after a...

Take the thermostat to Napa, they can probably match it up with another by size that is rated for lower temps, or just replace it with a...

I believe that they are "caps" that go over the springs under the seat.....

Check your electrical connections on the clutch...look for corrosion on the terminals and the wire to terminal areas. I'm wondering if...

If PTO noise is the main concern have you tried isolating different parts of the system to see noise shows up. 1) Run PTO without the...

It just donned on me that some Deutz engines have an external solenoid that opens the fuel flow via a spring and rod connected to a...

. ***yes to above*** You started this post with a mouse nest in the engine bay. I bet they also chewed up some wire insulation...

I'm thinking that you have a wire somewhere whose insulation has rubbed through. That's one of those, start at "A" and go to "Z"...

How to keep the soot and smoke away and ways to prevent having the head warp and crack on these Yanmar engines. - Do not let the...

My hearing is shot, but I hear more of a grinding than a squealing. I see from the evidence the belt is rubbing the tensioner arm, as in...