Recent content by Fullforce

Thank you both, once I get this little issue sorted out the only other thing I will have to do is replace the front axle oil seals.... or just keep adding fluid every so often lol

Got the parts in and installed last week, no leaks from the pump anymore! But im still getting air in the fuel after running the tractor for say 30-45 mins and it will shut down or loose all power, then I have to crack the bleeder at the pump to get the air out. So another question, it appears...

Funny, now it seem to be working fine, ill just have to figure out how to navigate through it! thank you!

Excellent thanks, I always am leary of what seems like random websites...

I found a PDF of some kinda manual with part numbers... I came up with 124550-51370, or 124950-51270 Im gonna order 3 of each and hope this works lol Has anyone ever ordered anything from www.tractorpartsasap.com ? They seem to have both of those in stock

I have to pay to look at the manuals it says

Yes I cleaned the area with degreaser and dried it completely. I could then see the fuel seeping out around were the fuel line fitting screws into the injection pump. Thanks for that link, if I only knew what size they were lol

https://fredricksequipment.com/product/injector-pump-ip-390/ This is the pump, and where the 3 fittings are is where its leaking, mainly looks like just behind the one on the left. Might try calling that place or Emailing them and asking what they have. Just couldnt find ANYTHING with a google...

There are no local diesel shops, I would rather just have new Orings/seals if Im going to take it apart. But I loosened the 17MM fuel lines and tried to tighten the 19MM fittings that are leaking and they didnt budge, I could try taking them off but if there are Orings in there I know they will...

I have a YM3810D that is excellent shape, but The injection pump has started leaking around the fuel line fittings. I cannot seem to find a rebuild kit for these or even just the Orings/copper washers that I need to fix the leak. I can find complete "rebuilt" pumps but no kit. Anyone know where...

Tractor has 350hours on it bought it used out of state. When you put it in low range it will move but will "slip" if you rev the engine up then slowly start speeding up If you go to medium it really slips and if you go to high it won't even move, I don't know if its the clutch slipping or does...

Tractor has 350hours on it bought it used out of state. When you put it in low range it will move but will "slip" if you rev the engine up then slowly start speeding up If you go to medium it really slips and if you go to high it won't even move, I don't know if its the clutch slipping or does...