flyerdan's latest activity

Not finding that specific model, but you might have a nose-about here and see if there is anything that looks close. A lot of time the...

Any outfit that wants a down payment for a quote needs to be avoided at all cost as that's a red flag as big as Texas.

Having a little leeway on that could help if you have a shaft that is scored from the seal. You should be able to tell where it ran...

I see that my go-to site seems to have purged everything Cat from the menu, might try this one and see if it pans out.

It's probably too new to be a 743, so it will have some degree of electronics and computer stuff, hopefully not the hand controls as...

Quick search shows the 951 at Walmart for under $10, the 961 on ebay for $8 and change. No luck on the other, but might check Digi-Key...

That actually looks like part of on of those heads that take the three nylon blades that would fit the holes. I have a Craftsman...

All the set screw checks above, then put a 3 jaw puller on and snug it up. Air hammer with a pulley driver or ground flat chisel...

Looks like a Sonalert, you probably won't be able to get the ring to secure it without buying the whole unit. A small ring of latex...

Possibly add it to the watched list and access it through the find threads menu at the top?

It's quite possible the first tank valve is a 1427C, as the catalog linked showed just the valve to be a 1427B. That repair was...

Here's another valve problem from a different tank, this one wouldn't shut off all the way and you'd get a waft of propane when you walk...

Grok's thoughts on it, I tend to agree... For the best lifespan of a silver/black tarp, use it silver side up. The silver side is...