fishheadbob's latest activity
-
FFord/New Holland 3930 (ours) John Deere 5103 (neighbors) These are both 2wd, ~50hp, independent PTO, 4+1/2 range or 3+1/3 range gear...
-
FBolt rubber to drawbar. Cut an inner tube or such. You might have other issues as well. With my tractor and large windrows the rear...
-
Ffishheadbob replied to the thread Varmit Proofing.i've heard mothballs work. And stop feeding the barn cat so he gets hungry.
-
Ffishheadbob reacted to nyone's post in the thread 20-25 gallon sprayer recommendations with
Good Post.
Hes alreaty got a tank and the whole setup but dosnt want to change the pump..just wants to smack it with his checkbook so I dont think... -
Ffishheadbob replied to the thread 20-25 gallon sprayer recommendations.Check out sprayers at Northern Tool. I had a cheapo from Tractor Supply with a 1 gpm pump . The cheap 1 gpm pumps don't last very long...
-
Ffishheadbob replied to the thread ATV mounted sprayer.Just fine with a 3.5 and a 1gallon pump at the same time.
-
Ffishheadbob reacted to Complete Turf Care's post in the thread What is actually in a bag of fertilizer? with Good Post.
In a previous job, I formulated and blended thousands of tons of fertilizer used in rice, soybeans, corn, sugar cane, etc. There are...
-
FThat's how they work when turning sharp. My solution is to raise the 3 point hitch lever just a tab above its stop when initiating the...
-
Ffishheadbob reacted to rgr33's post in the thread People with rotary 3 point spreaders... does your tractor ever get corrosion issues? with Good Post.
If you’re using anything corrosive in a spin spreader, you need to be borderline obsessive about cleanup after use I pressure wash...
-
Ffishheadbob reacted to LouNY's post in the thread This is probably a stupid question, but...... how do you unload a heavy implement from the truck? I do not have a front end loader. with Good Post.
Depending on how you are hauling it and it's width. One way would be a chain fall or come along to a sturdy tree limb. The other would...
-
Ffishheadbob reacted to 2manyrocks's post in the thread 1st time at my new property & 1st time ever brush-hogging - some lessons learned with Good Post.
https://highgrademfg.com/tail-wheel-assemblies/ A stout 5 or 6/foot pry bar also makes it easy to shift rear implements back and forth...
-
Ffishheadbob replied to the thread Ford 3930 Losing power.Start with whichever looks esiest, probably the cable, and go from there. 3930s had a lot of balls, a 6 foot bush mower shouldn't be a...
-
FI needed to renew my driver's license. Photo needed "because I've aged some". Got to have that star in the upper corner! Well, on the...