Fallon's latest activity

The 40 & 60 series all have weak front wheel bearings. It's not the end of the world. Keep an eye out for oil leaks & get em fixed if...

Ya, worn out seals. The worst oil you can get in the store today is probably better than the best you could get in the 50s. Lots of...

At 4,500lbs your not going to be doing that much with a stump bucket. Not nearly enough traction to dig into dirt, much less a stump or...

I'm about 50 hours & maybe a year behind you. Issues with front wheel bearings & axle seals, but nothing with the engine or emissions in...

Ya, will give it a try. Beat on it with a sledge & drift while the jack had tension on things. At least its safer than loading up the...

You can see the hoses of the new to me oxy-acetylene torch in the photo.

A flail has a couple more bearings & belts than a rotary which eat a bit of HP. A bit more drag on a roller than a tail wheel I expect...

It won, al least with me for now. It broke my chain. Same setup as before only wits a single chain under the jack & used the blade...

Get the $120 actuator rather than $50 one. The cheap one is a bit to slow or weak, depending on which cheap one you get.

I never take the loader off. I can't be bothered to take the 5-10 minutes to do it. I've taken other Kubota & JD loaders off but haven't...

I put an electric one on my previous tractor. Linear actuator for power SSQA?. I have picked up a manual diverter & small cylinder to do...

You have more HP than my L4060, but the same frame. My 7.5' Peruzzo Super bull is 1,500lbs & the max I should be lifting. It's probably...

Starlink https://www.speedtest.net/my-result/a/10887818365 Maverix fiber https://www.speedtest.net/my-result/a/10887821780 From my...

My cabbed l4060 was valued at the mid 30s by the dealer a year ago. A blower & a backhoe are $8k each. Not clear if a hoe was part of...

A deckover power tilt is what I ended up with. A bit steep to load the tractor, but not to bad. No fenders or rails to load stuff from...