edgar10937's latest activity
-
EIt was rainy the other day so I was looking for a geezer putter project. I ended up making a suitcase weight rack. Just a simple little...
-
ECorn head grease or semi-fluid NLGI #0 grease
-
EI think you found your own problem. Post a picture of the inside of the cap and the rotor. The center of the cap should have a carbon...
-
EIn my backyard last night. These suburban deer know they're safe. Lol.
-
Eedgar10937 reacted to rScotty's post in the thread M59 Help: Dealer Wants $6K to Replace the Wiring Harness with
Good Post.
I have an M59 and would be glad to help. The M59 is a classic - one of the best things IMHO that Kubota ever built. But how in the... -
Eedgar10937 reacted to jyoutz's post in the thread How to Restore Grass to Burn Piles? with Good Post.
Grass establishes by two methods: rhizominous root spread or seed. Hot burns kill both in the soil, and they either have to be replaced...
-
EMy dad used to burn all of our household trash once a week in a big culvert pipe stood upright with an air hole at the bottom. Anything...
-
EI have a really hard time throwing away anything my brain thinks could be conceivably useful, which makes being organized extremely...
-
EStay out of debt Don't pay interest Live within my means (e.g., own modest house, even if you can afford better/bigger) Drive cheap cars...
-
Eedgar10937 reacted to stevem5215's post in the thread Need advice on a machine to manage timberland with Good Post.
4000 acres requires equipment that costs BUCKS. You will not get away cheap. Hiring it out will be even more expensive. My...
-
EA couple of terrible shots of about 2 dozen turkey chicks (hidden by fence board) with momma this morning, just about the time I was...
-
Eedgar10937 reacted to BackRoad's post in the thread Security camera vision - any ideas? with Good Post.
Strand of spider web...
-
Eedgar10937 reacted to Topzide's post in the thread Security camera vision - any ideas? with Good Post.
Bugs. I get those all the time on my doorbell cam.
-
Eedgar10937 reacted to LittleBittyBigJohn's post in the thread Parallel or perpendicular blade orientation when mounting 3 blades to a mower deck? with Good Post.
It shouldn't make any difference at all. They will slip some as you mow, so wherever you put them to start, they will be in a different...
-
Eedgar10937 reacted to dieselscout80's post in the thread Parallel or perpendicular blade orientation when mounting 3 blades to a mower deck? with Good Post.
Since most decks are belt driven the blades likely won’t in the same position after a couple minutes.