Recent content by detel

I really like some of the mods I have seen posted on here and would like to try to make some of these things myself. What kind of welder should this newbie get, a 225 AC or a 120 volt flux core welder? Thanks!:cool:

I will check everything again to make sure all of my settings are correct. The only thing that is different on mine based on the photo attached is that on my clutch friction plates, the center hole lip that protrudes outwards, is facing the rear of the tractor and not the front as it appears to...

HELP!! I have split my Farm Pro 2430 to replace the clutch. I installed both clutch disks and put everything back together. PTO engages just fine but the drive clutch does nothing. It will grind when I try and put it in gear. I readjusted several times with no luck so I split the tractor today...

I was able to do some adjustments and now have more movement then I have previously had. I barely press down on the pedal to disengage the clutch. I believe that more adjustment is needed on the clutches.

Thank you Tommy. I checked both the High/low and the 4W/2W lever to make sure they were in engaged or at least in the position where they should be engaged. Once I got the tractor running to where I could check the drive, my fuel delivery line busted so I shut her down. I received my parts...

Hello, I have a Farm Pro 2430 that does not move regardless of what gear you have it in. High, low, 2 or 4 WD, it doesn't move. I lifted the front end off of the ground with the bucket and tried the 4WD to see if I could at least get the front wheels to spin but no luck. It almost feels like...

I would like to get a service manual for my '93 Ford 4630 Tractor. I lost the hydraulics and the PTO and believe that I can get to pump through the top plate by removing the seat and the remote. I really would like to get a Service Manual that is in print or on a CD. I went to the local dealer...

I have a '93 Ford 4630 dsl., 2 wheel dr. that I was bushhoggen with and it felt like I somehow hiit the lever and shut the pto off because the mower started slowing down. I check the lever and it was still in gear so I went to raise the bushhog to take it to the barn but none of the hydraulics...

I have a '93 Ford 4630 dsl., 2 wheel dr. that I was bushhoggen with and it felt like I somehow hiit the lever and shut the pto off because the mower started slowing down. I check the lever and it was still in gear so I went to raise the bushhog to take it to the barn but none of the hydraulics...