Recent content by crazyangel

I need some help guys. I have a hay wagon with 4 rusted out rims. Currently the rims have used (and dry rotted) truck tires with tubes. I need to replace them all. The problem is that I know nothing about implement wheels. I have determined the rims are 15 diameter, 6 hole, 6" bolt circle, and...

Deleted

Over the Winter I was fortunate to have the opportunity to purchase the prototype Wicked Grapple from Everything Attachments, and I scooped it up before the deal slipped away. It was built and tested by EA without paint, but I wanted to give it an added layer of corrosion protection before...

I am finally getting around to finishing the 3rd function plumbing on my L5740 for a grapple hook up. I have the factory Kubota 3rd function kit already installed, but it is delivered with caps on the end of the lines. Can anyone tell me the thread type so that I can go buy the correct...

I was next to a tractor trailer the other day and noticed the lug nuts on the wheels had a simple visual indicator showing that the nut had not loosened. Pretty clever. Anyone use them on their tractor? http://www.wheel-check.com/

The engine temperature gauge on my RTV900 is not working. I believe this is the same or similar engine as the BX23. I have done a basic check of the wires to make sure everything is plugged in and that there is no visible damage on the wires. How can I test whether the problem lies with the...

My tractor is in a Shelter Logic round top garage.

The engine temperature gauge on my RTV900 is not working. I have done a basic check of the wires to make sure everything is plugged in and that there is no visible damage on the wires. How can I test whether the problem lies with the sensing element in the engine or at the gauge itself...

I recently bought a 2004 RTV900 and there are some cracks in the seat covering. I would like to replace the vinyl. It should be pretty easy if I can get the material. Anyone have a source for material that will match the existing grey and hold up well to the elements?

I am going to look at a used RTV900 tonight, and would like some advice on things that I should be aware of or on the look out for. I have read some owner reviews as part of my homework, but haven't really identified any common issues to check. :thanks:

I need to move my tractor a few miles down the road, and I do not have a trailer available to do it. I really don't want to destroy my tires in the process though. What kind of things can I do to protect the rubber? I am considering taking the bucket off the loader and putting it in my pickup...

I have an older hay wagon that came to me used a while back, and I have been putting some work into it this year. What it needed more than anything else is a new deck, and I tackled that yesterday. The wood for the rack frame was in decent shape. So I just replaced the rotten deck boards with...

Shame on me. I should have removed all my attachment pins and greased them when I got my L5740 because now I cant get my box blade off! The bushings in the lower link arms have galled to the pins. So the pins wont come out. I tried whacking the pin with a dead blow hammer for a while but I don't...

I am putting up a Shelterlogic garage to store my tractor in. I have cleared the top soil, and placed a plastic vapor barrier under 6" of crushed stone. I have also used 2x8 pressure treated lumber as a sill plate under the sides. What additions should I consider as I finish the job? Also what...