Yep, I saw a video on YouTube for a 4 cylinder Mico pump that had the oil feed from from the engine. My model doesn't have that feed linne though. I think I ended up answering my own question. I was 25 hours away from an oil change so I went ahead and drained the crankcase and waited long...
Thanks for the quick reply. I added the oil through the large plug on the top of the governor. I started by adding 1/2 qt and when I looked through the fill plug on the governor I couldn't see any oil at the bottom of the governor and nothing was running out of the overflow tube. I was out of...
I checked the oil level in the Mico PES3A pump on my Farmtrac 45 the other day and it appeared to be low (in relation to the overflow line location). I added oil via the fill plug on the top of the pump but it never ran out of the overflow. I started the Tractor after adding oil to the pump...
Good day all. I have followed the forum for quite a while and found it to be a great source of information. I need to remove the rear wheels from my Farmtrac 45 to do some brake maintenance. The tractor is 100 miles up the road and I'm trying to see if anyone knows the wrench size that is...