Recent content by chupacabra

Hose was cracked and leaking and I replaced it. Cranked at first then died and will not restart. I loosened the two bleed screws and let fuel drain out then retightened them and still won/t start. I read the manual and solved the problem.

I have two little tractors. Kubota 5100 E and an Iseki Tx1300. Both good little tractors. But, see the attachment, the transmissions have a 180 degrees difference in the shift patterns! To say the least, it get confusing shifting without having to look when switching from one to the other...

What is best to wear on a tractor? Steel toe boots, regular boots, tennis shoes? I wear tennis shoes, as it makes it easier to get up and down on a tractor, plus getting my leg over the hump. Chupacabra

I don't understand how to set this lever bolt to keep my rotary cutter at the same height every time I lower my cutter. And what is the spring for? Thanks, Chupacabra

The cutter is 42 inches wide and has no name on it. Could I just use some 140 weight in it?

The rotary cutter that I have has a sticker on it saying to use only non fiber wheel bearing grease. What is that? I have searched online and cant find it. Is it the 0 grease from snapper or what? Thanks, Chupacabra

I have looked and searched and read but am not sure how to set the top link on this cutter? I don't know what kind it is so I can't look it up. After I get the front 1 inch lower that the rear, where is the top link supposed to be between the arms? Or is it missing a piece. Thanks in...

This is the 3 point system on an Iseki 1300. I have a four foot brush hog and I was going to hook up limiter chains. I have a schematic in my manual, but it does not say what the various little welds are for. #1 in my picture is where I would assume one end of the chain would go. But that...

I found a good replacement battery for the Tx1300 at Costco for 71 bucks. It is size 51R. It is a Kirkland battery. I have two on my Ford Diesel and they are excellent batteries. I'm posting this because I could not find another tread on a Battery for my Tractor.

Can anyone tell me what this thing is? It is about 2 and 1/2 feet long.

ONE OWNER TRACTOR I post these just for general info and pictures.

Any ideas on what this is and how it works? This was posted for sale in cl in dallas and he had no idea what it is.

This looks pretty good if anyone is interested and is close. Isecki Tracktor

Does anyone know how the manufacturers determine the lift capacity of the 3 point system? Do they just start lifting something and gauge at what point the safety release valve opens, or what? I can't find out.

I bought one Thursday, (the cheapie, $129.00) and got it home and hooked it up. Very, Very poor welding on it. Plus, the holes for the top attachment were catty wampus!! Just looked like it was spray painted on the top. Bottom was barely painted!!! I will attach some pictures when I go out...