Recent content by cedarman

I have seen that TeeJet makes a 10psi tip that won't leak when the pressure drop below 10 psi on the boom sprayer. What is the mfg # for this tip and do I have to do anything other than insert this tip in my current setup which has a filter and regular 20 inch spray tip? Talked to the people...

Laid down 2-4D with boom sprayer Sat. am over the yard. Hot windless morning. Kept the pets off of the yard for a few hours until it was good and dry. Beagle has been having eye and respiratory problems since this general time period. Any chance of weed spray poisoning or irritation? Taking...

Markham toothbar arrived today and will install this weekend. I read awhile back on the best way to drill but would appreciate a reminder. Also, is it best to have the nuts for the bolts on the inside and cut bolt off reasonably close to nut?

Just got my 55 gal 3pt sprayer 100" 5 nozzle boom from Shaben Industries. Hooked it to the 3pt and filled with water for testing on leaks and pattern. Works fine. Will point out that the handgun with 25' hose is on the hookup side and therefore I have to remove the Imatch-no Big deal but...

I've been looking at 3pt Sprayer rigs for a while now. Seems like they all ran around $950-$1200. I ended up ordering factory direct from Schaben Industries of Newton, KS @ 800-394-7662. Got a 55gal, 100" five nozzle boom with 6 roller pin upgraded pump, quick coupler and 25' spray gun for...

Went ahead a bought the toothbar from Markham Welding, after talking to Melissa on the phone how could you not? Great phone gal and helpful to boot. Said she will call the day it ships and also the day it is due to arrive to make sure everything is as it should be. Apparently prices have gone...

Raised the hood on my 4310 up all the way and the chrome bar engaged the slot that holds it up. Seems to be stuck and won't come back down. Referred to the manual and it shows a latch release rod to push but I don't seem to have one. What do you push to release the hood back down? Also, my...

Have only had my 4310 less than two weeks and 12 hrs of seat time but would like to make these observations. The 4310/430/60"mmm is a legitamate working machine. I was really surprised at the ease of the mmm walking through the knee high pasture type mowing I did on my upper piece of...

My 4310 ehydro is delivered and home. Got it off the trailer in time for the rain to get everyone wet. Wife wished she had a picture of me driving it to shelter holding an umbrella. As the rain hasn't stopped (and isn't forcast to for a few days-wouldn't you know it) will try and post some...

4310/430 61"hd bucket on track for delivery 19th. Dealer is recommending the rb1072 rear blade which is a 6' standard duty and weighs 283 lbs. Is this enough or would the medium duty rb1172 @505lbs be better? Basically being used to grade gravel driveway (600') and a (very)little snow...

Search is finally over. Bought the 4310 ehydro today. I want to thank this site and it's members for all the help and information they have extended to all of us new lookers. You made me look like I knew what I was doing. Specs out as: JD 4310 ehydro, 4wd, mid pto with rear svc, 60" 7iron...

Are the ehydro problems with the transmission solved? Whenever I ask a Deere dealer they don't seem to know what I'm talking about. The answer varies from "Heard about some earlier models having some problems but we haven't had any" to no problems at all. However, I have seen on this forum...

I've been quoted $19,550 on a NH TC33Da with 14LA Hydro, 4WD, fold ROPS, Deluxe 3Pt, std axle, mid PTO, R-4 60" HD Q/A bucket, joystick. Any idea how a similiarly equipped DX33 would compare? If I add a NH 60" belly mower they want an additional $2500. Are there any significant differences...

What is the basic weight of the TC 24Da and TC 33Da? Also, does the 24Da 60"mmm discharge the grass from the rear or to the side? For those operating the 24Da model w/12LA, how much rear ballast is needed for loader operation? Keep wanting that 33 but can get the 24 w/fel and mmm for less...

Got to be NH, just like the feel better. Went to the dealer today but salesman wasn't working so a guy in the shop got me the keys and let me drive the 24 and 33 AGAIN anywhere I wanted, pastures and side hills with some slope factor. I just keep going back to the 33 and that's what it's going...