catmanjan's latest activity
-
Ccatmanjan replied to the thread Weifang CP 504 with shuttle shift, PTO popping out of gear.Just an update, the shift fork, shaft and PTO coupling were destroyed by the previous owner ignoring the fact that the PTO clutch wasn't...
-
Ccatmanjan replied to the thread How do I remove this 2 speed pto jack shaft?.Thanks they seem either the same size or very very close... Can't get my callipers in for an accurate reading on the inner one and they...
-
Ccatmanjan reacted to ptsg's post in the thread How do I remove this 2 speed pto jack shaft? with
Good Post.
Measure the OD of the bearings, the inner bearing will most likely fit on the outer bearing bore, even if it's a close fit. So the... -
CThe splines on this shaft are destroyed and I can't work out the proper way to remove it I've removed all the circlips and when I pry...
-
-
Ccatmanjan reacted to Bob Rooks's post in the thread Weifang CP 504, AKA TY series tractors, AKA defunct TMT brand in Australia - what hydraulic fluids should I use and where? with Good Post.
If your transmission and hydraulic system share the same oil then use UTF, which you can also use in your power steering.
-
Ccatmanjan posted the thread Weifang CP 504 with shuttle shift, PTO popping out of gear in Chinese Tractors.Hello I am trying to fix a "PTO popping out of gear" issue whereby the PTO will stop spinning as the lever kicks back to "off" If I...
-
Ccatmanjan posted the thread Weifang CP 504, AKA TY series tractors, AKA defunct TMT brand in Australia - what hydraulic fluids should I use and where? in Chinese Tractors.Hello this question has been asked a million different times but a lot of them are conflicting - what is the latest advice on what...
