Carl_NH's latest activity

I started with my Cub Cadet 1811 (similar to the 445) with a plow and chains, for 8 years, then got my Kubota B21 in 2001 and rear blade...

Yes the 2563 should fit your L2250 but the loader comes off and the front blower and frame goes on - its appears to be a quite alot of...

I leave the caps on the valve until I want to use the auger or bucket. I have the hoses connected with a coupling on the Auger and...

Matt, I installed the 14MM QD like these 1 Set M14x1.5mm Hydraulic Quick Connect Coupler Female Thread Pipe Fitting8G | eBay so I could...

Looks good from here - and you have a cart to load rocks and stuff! I got the same plate and found a bolt on hitch plate from off TEMU...

You are fortunate to have a known machine, so inquire when they last did the major service? Typically (300 hours) is Hydraulic SUDT and...

OK so it started now with a puff of black smoke, which is normal in the first few seconds after starting. I suspect it was the plugged...

So you replaced the filter without shutting off the fuel, I guess? That eliminates air and its not leaking any now after replacing the...

When you installed the new fuel filter, did you let the small canister fill with diesel before tightening the bowl? That eliminates any...

BCP yes that is an interesting list - I thought there would have been more private jets, G550 etc but those go fast and land, and sit...

Don’t see these often- took off from Columbus oh

As 5030 and PTSG point out it may be possible to remove the covers and drive out the pins in couplings and have enough wiggle room to...

Jeff are you talking about the front wheel drive shaft or the main drive shaft for the Clutch/HST? If its the main drive shaft and...

I added the WR Long 3rd Function a year ago, and yes, had I known it was so simple, I would have bought the parts like you did. It was a...

Looks really good - nice, clean installation!