Recent content by captain guido

Vic, I was doing the same thing with hitting mine on the trees. I made two flat metal tabs, 3 1/8" H x 2 1/2" W, cut a path into the metal tab that you can run the wire through or a hole big enough for the wiring with the fittings (I found the way that I did it as shown is the easiest). you...

I just wrapped up this project this afternoon. Built the hydraulic system from scratch, fabricated the joystick mount and front mount to convert a JD 318 54 inch hydraulic snow plow to my GC 2400. Been planning this project for over a year and just completed the painting today. All works...

So here are the photos of the completed build, it actually was not as difficult as I thought it would be. Fortunately the chief P240 joystick was a perfect match. The P240 is 10 GPM, the MF GC 2400 has is 6 GPM. The blade is actually mounted to my modified front weight bracket that I...

Just about to finalize a conversion of a JD 318 hydraulic snow blade to my MF GC2400. I've self-fabricated a joystick mount and the front mounting bracket and the physical hook up is perfect. I'm having local MF dealer run hydraulic lines to the joystick from the machine's system just to make...