My L4701 has a stop with a twist knob on it to set the lower level of your 3pt hitch operation. With my bush hog and flail mower, I find that the knob loosens up with lifting and dropping at every turn, and I eventually have to move the stop back up, and then retighten the knob. Has anyone...
I have a Land Pride RCR1872. It's still working, but here's the deal.
I ran it for a while with the gear box bolts loose (from the cutter deck). During that time, the shaft coming out of the gear box that the slip clutch attaches to got worn down and now there is considerable play between the...
I'm considering the purchase of a new L4701 to keep up 30 acres of hilly meadows and woods. Should I consider stepping up to the Grand L series 4760? what would I be missing? The work will probably involve a 6' rotary mower, loader/grapple, finish mower, box blade (pasture leveling).
Yeah I...
I want to sharpen my RCK60BX23 MMM with a bench vise.
Got one off with a good wrenching and hanging on to the blade,
but on the other side, the blade slips and if I secure the top bolt, I'll loosen the pulley, and I'd rather not fight with the belt spring again.
What's the trick for locking...
I've got about 1.5 acres of flat grass that I cut now with a 42" mower in about 90 minutes every 2 weeks or so, and another 2 acres that is mostly 10-15% grade, but with 500' of bank along the road that is steeper than that. Some of that will need to bush hogged for a while until its tamed. I...