Recent content by bob42

Kioti's telescoping links makes it easy to aligning the tractor to implements but I found it difficult to hold the spring loaded catch release, slide the movable part, and slide it on the implement pin at the same time. To make the telescoping links slide freely I added lever operated cam to...

Several months ago there was a post concerning FEL quick release lever not staying in the released position. In a reply it was mentioned that the lever needed to be pushed far enough so it would stay. I also had the same problem on my DK40, the lever could not be mover far enough to stay...

I made my forks originally for a IH 3414 from a 1 3/4" sq. axle cut in the middle on a taper with a cutting torch and straight edge making 42" long forks. The vertical part was 2x3x1/4 angle. These worked ok but would twist to the side if I tried to power under anything. Later I added 2" sch...

I have learned so much from many of you on this forum that I need to pass on what I have learned. A year ago my DK40 with about a 100 hrs. on it went to full throttle after a restart. Called my dealer and he had a replacement installed in a few days. It now has 150 hrs. on it with no...