Recent content by bob vaillancourt

hey all. have a problem hope someone can help . tractor chains that i bought for my tractor a few years ago had a twist in the side chain . its where the cross links are bent on to the side chains. side chains have a twist and when i try to turn the link that the cross link is attached to it...

posted a qwestion yestrday about float on front bucket on a yanmar 336d. after reading booklet on front loader oporation. while joy stick is in netral position. moving it into lowering position their should be a double detent first is to lower bucket. all way down should be in float position. lt...

hi all i have a yanmar 336d . wondering if any one knows how front bucket is placed in a float mode . not sure it even has this feacher.would be nice for snow removal.

hi all. I have a exhaust question. the tail pipe on my muffler or the stack . what ever it would be called . i wanted to take it off and cut it square to attach a rain cap. what i found was a exhaust pipe with in a exhaust pipe . outer pipe is 2.0 at top and expanded to 2.0625 at the bottom...

hi all. i have a question about adjusting brake free play . my repair book says to adjust each pedal for 3/8 to 1 inch free play. both pedals . and not any more than 1 inch free play together i take it that they mean hooked together . but the problem is that the right pedal sits 3/4 quarters of...

hi all. can any one tell me what size jhon deere is the same size as this 336d looking for brake springs and gaskets for drums . on the deere sight the 950,1050 seem to have the same brake housing cover . i know for years yanmar made the drive train for deere.theres a jhon deere dealer just down...

hi all i have a yanmar 336d going to change hyd/tran fluid any body know how many qts it holds or gallons thanks

hi all i have a yanmar 336d tractor and the hydraulics are slow . never changed fluid or filter. in the winter i have to take a propane torch and heat the joy stick for raising or lowering the bucket . any help on chainging this would be great. second qwestion i have had to repair the stearing...