bmaverick's latest activity

How to keep the soot and smoke away and ways to prevent having the head warp and crack on these Yanmar engines. - Do not let the...

I hate to say it, but what you say, my gut tells me you have a loss of compression. Could be as simple as rebuilding the head, but my...

This has a YANMAR engine correct. Your best source of info should be the Yanmar section here on TBN or on the YTOG. There are ways to...

Looking for some advice. Bought a JD855 about 1 yr ago although it was a bit smokey started ok and ran ok until I put a rotary hoe on...

If your machine is smaller and able to get onto smaller lots to do this work, then an item like the Deere Frontier RT30 will work...

Many sod companies use this type of machine. Gives excellent results. If you already have a rotary tiller, then simply add the...

Your cultivator looks very much like a rotary tiller. What if you pulled a drum roller behind the rotary tiller too? A rotary...

I originally thought I could buy the U joint replacements from brand M parts, but it looks like it’s just some of the components. The...

Like this,

What machine do you have? The YTOG might have the parts manual for it for free.

Took some measurements, 3-inches is the way to go!

I'm off to Menards for these anchors in 1/2bolt x 20thd x 2-deep. Anyone know off hand the bolt length needed? Would 3-inch or 2-3/4...

I did that with mine at first, then put in some concrete anchors. Just find them, blow them out when ready to use it. Bruce

Thanks Peter, I needed to read that. I’m just so frustrated and aggravated with this whole situation. Here it is in a nutshell: I...