Recent content by bloob

This is ultimately what I did since I was replacing all the bearings and seals anyway. Never did get the pully off but didn't waste any more time trying after I had it all apart. Back together and up and running. Thanks!

Maybe 1/2", but I was wrong about the pulley itself moving along the spindle. The movement is from inside the gearbox, the pulley and spindle move together. I have soaked it with PB and will keep fiddling with it.

I thought of that and then forgot I thought of that. Will try. The pulley itself isn't locked though - it has some play up and down but then it hits something. Maybe the key is locked to the pulley but not the spindle.

I need to rebuild my gearbox on my RCK60B-22BX. There's a good vid about it on Youtube, but in the vid he just slides his pulley right off and says "just shake it around" if necessary. That is not working for me. Have tried all kinds of shaking and tapping and banging with no luck. I applied a...

I have an older Kubota BX1800 with a mower deck and an LA211 loader attachment. Was not particularly well taken care of before I bought it used but fully functional, have had it four years. A few weeks ago I noticed a hydraulic leak and traced it to the hydraulic block at the transmission that...

Can anyone tell me how to unscrew this fitting from my Kubota BX1800? The hose blew out and I bought a new one, but am unsure what it righty and lefty on this fitting. Don't want to destroy it by forcing it the wrong way. Thanks!