I keep having this problem with my 3-point hitch. It goes up-down no problem. I don't use it for a few months and then it's stuck in the up position. Nothing changed - I didn't touch the adjustment knob at any point. I pulled the plastic covers off the area under the seat. I also pulled the...
My brother-in-law's Bobcat will build hyraulic pressure when shut off. It will actually lift the front wheels off the ground when sitting overnight.
Is this a faulty hydro filter? Any suggestions?
Okay, I am lazy. I hate to get off the 2520 before and after mowing to raise/lower the ROPS. I fabricated a gas lift assist and wanted to share. The total cost was about $30 in parts not counting scrap metal and 2.5 hours to do the math and fabricating.
I bought a heavy duty gas lift so I...
Okay, I took delivery of my 2520 last week. What a joy. Here are my first impressions after mowing 3 acres with the 62D deck:
1) In high range, I think my 2210 could propel the mower deck better. The 2520 seems to bog down in high range very easy under load. I could watch the tach drop down...
Markham Welding is one super place to deal with. They were fast, friendly, and always called me to keep me informed of the order. They shipped so fast I swear the UPS man burnt his hands one the still-hot welds! Couldn't ask for better. If anyone is looking for a toothbar, you first stop...
Hello - my 2520 hasn't arrived yest but I am already finding excuses-I mean reasons- for the backhoe (I completely blame that on Chris2520). I can't afford it right now due to uptrade difference from the 2210 to the 2520 but if I look into the crystal ball, I may see a backhoe in my future...
I ordered front work lights for my future 2520 but the dealer says the rear work light is not compatible if you install the front work lights. Is that true?
Okay, I bet this has never been posted. I fiddle around with Jetskis every once in a while. I have a shop crane and a special ski strap that grabs the skis on the side edges to lift them off the trailer to put on a repair cart.
I wonder how difficult it would be to fabricate a frame to use...
Hello - I am looking for a tooth bar for my 49" bucket on my 200CX FEL. There are two people on eBay selling them: Yankeewarehouse ($190+shipping) and United Steel Works ($230+shipping). Both companies said they need to custom make the bar because the JD 49" bucket is not standard. Does...
Hello - I am working with my dealer to trade my perfect 2210 with 62C MMM, and 200CX FEL for a 2320 with 62D MMM and 200CX FEL. My 2210 is a 2004 model with 100 hours. It was used to mow and light loader work. I would like to upgrade since I am starting some bigger projects.
What would be a...
At what point do you stop extending the cylinders when removing the 200CX? Is it when the cast arm spring down or do you fully extend the cylinders 100%?
I just bought a 200CX for my 2210. The dealer had my 2210 in for spring service and I decided to get a FEL. I originally wanted a 210 but the JD dealer said they sold the last one back in October 05 and couldn't get any more. He said the 200CX is a good loader with all the 210 features and...
My 2210 has the 62C MMM. The label on the deck says to adjust the front deck wheels about 1/2 off the ground and the back deck wheels touching the ground or a up to 1/2 inch above.
I adjusted my front wheels to about 1/2 and the rears are touching (adjustment made on flat concrete). When I...
I took advantage of the 3 year 0% deal and got a new 2210. It is being delivered Wednesday. I'm quite excited. I asked the dealer "...this is a 2005 right?" He said "...the 2210 hasn't changed for a few years so it really doesn't matter." Is that the truth? Is there any differences between...