No problem. This forum is a great source of info!
I don’t really want to leave the Operator Safety Module jumped since it bypasses the seat safety and the parking break safety features full time(wouldn’t recommend jumping safety’s). So my only other question now is, do I buy a new OEM...
Alright, figured out the problem!! It is in fact the Operator Safety Module. Either the connectors, or the actual board inside. Jumped across the safety’s from the blue wire connection(to solenoid) directly to black wire connection(ground) in the module itself....turned the key and and got...
Ok, so parking brake set and dash light is on. Assuming that means the safety switch is ok. Seat switch still jumped, and still no power to solenoid. Checked and cleaned #9 relay and wires. All looked ok. Swapped #8 and #9 relays as a check, still no power to solenoid.
Could it be the Operator...
Thanks for the quick reply! Good info! Yes, that’s the same diagram in my owners manual.
Yes i switched the relay with one that I confirmed good.
Haven’t checked the #9 neutral start relay yet. Does that send a signal directly to the solenoid, or to the #4relay which in turns send signal to...
My TC40A will crank but wont start. Need some help troubleshooting. This is how far I’ve got:
Checked the fuel lines, changed the fuel filter, manually bled the the system at the injector pump bleed valve. Did not fix the prob.
Unplugged connector at Fuel Shutoff Solenoid, jumped from...