BeezFun's latest activity

Piston ring compressor works great but you probably don't have that or you wouldn't be asking. I've used a cut soda can and hose clamps...

Carefully wrap a few snug turns of mason's line around the insertion end of the seal to compress it. once started, pull the cord free...

Thanks for the ideas. I do have a piston ring compressor but it's too big. I ended up cutting some thin shim stock and using it like an...

I'm having trouble getting the new seal to enter the barrel on this single acting cylinder. I've rebuilt double acting cylinders before...

Here's the nut now that I took it off. Those slots closed up about .005" after I took it off, so it's some kind of lock nut although I...

Got it all apart, what is the purpose of the diagonally machined slot in the retaining nut on this rod? All it looks like it does is...

I don't have any way to protect the surface, other than some painters tape. The seal between the valve body and cylinder is shown in the...

In your experience is it better to remove the 4 hose fittings from the check valve, or remove the check valve and leave hoses attached...

Yes, that's a good idea. Surprisingly I did find a brief description in the manual about removing the two main cylinders. It says the...

Yes, the bottom of the cage rests on a rubber pad, and the frame at the opposite end also rests in a cradle pointed to in photo below...

A single acting cylinder on my lift is squirting oil out the vent, so I assume the cylinder seal is bad. The check valve has 4 lines...