Recent content by ASGAR

  1. A

    Snow plow and mount for Kubota B7510

    Well, it is 2022 now, after 15 years of use since I posted this tread if I re-posed pics the plow would all look the same. I have not had any issues at all. Using the right side power position on the loader valve is fine. Nothing broke, bent, cracked or popped. If I did it again I would not...
  2. A

    Oil change intervals

    I have a 2016 Toyota 4Runner that pulls 3-4K trailers about 15% of the time and mixed driving for the rest, some woods. This was my first '10K' oil change interval car and it bugged me to no end. After trolling the internet it seems like the oil filter will filter the oil during use to a level...
  3. A

    FEL Bucket Clamp on Shovel

    I was looking in the Northern catalog and saw just what I thought I needed, a quick spade. I decided to make one myself... I mounted it like my Paynes clamp on forks, which by the way I am super happy with. I took a 13" diameter by 3/8" wall pipe and cut out a section. I used a cold saw...
  4. A

    Weld on FEL Hooks

    Yet another 'I welded on hooks post'. I thought it would be fun to see what you all thought, and what I did wrong or did not think of. I kept the hooks centered since this is a small machine. The low back hook will give me a bit more lift capacity and visiability over the top front hook which...
  5. A

    Snow plow and mount for Kubota B7510

    I thought it would be nice to plow with my B7510 HST Kubota so I built a subframe and plow last month. I started with an old meyer 7 foot blade. I cut it down to 5 foot and re-skinned the bottom 6inches. The subframe was made out of lots of bits and pieces I had around. The tubing is 2x4x1/4...
Top