Recent content by armyret

My tractor calls for 2600 rpm to achieve 540 pto output. My question is that with my finishing mower it cuts just fine at 1800 to 2000 rpm, will this damage the gear box on the finishing mower? Just how important is 540 Pto on most attachments? Such as rotary mower, sickle mower etc? [/list]

There recently was several posts concerning a leveling a turning plow. I am confused and the reason is my turning plow has a differnce of at least 4 inches in height between the lower link pins. I thought this had something to do with the plow running level when plowing if that is not the case...

Posted prev, however bit confused, I thought that once scoop was levelved to change the tilt of the scoop all you had to do was either tighten or loosen the half inch bolt that is threaded through the scoop to the frame sort of like a stop.can be titled as much as two inches. Let me know if I...

Have new toy and not sure of how to use. Bought a pond scoop that may be connected to 3PH front or back with a trip lever. If anyone has any tricks to using this let me know. I need to move some dirt and would like to deepen the edges of my pond. Should it be level, tilted, best position hook...

Someone please tell me how they have used the scoop. The one that has a 3p connection on the front and back. Has anyone ever use it with extensions attached to a boom pole?

Has anyone ever constructed a pond rake that will work off of the three point hitch and boom (pig) pole. I have need for such a item and all comments will be appreciated.

Do you shorten or extend the top link to plow deeper I am suffering from memory loss for I know this and have not forgot.

This may not be the correct location to post this but I am wondering what a fair price would be to charge someone to square bale hay. This would be using my tractor and baler. ?

Hope some of you old time farmers reply to this. I have a 7ft sickle bar mower and it cuts fine except that the end keeps clogging up with hay. Only the very end aprox 6 to 8 inches. Am I doing something wrong? Also I am mowing with a B78oo kubota with hydro transmission. What gear should I...