Hello all
Lately, i noticed my tractor was more "smelly" then usual. I had it for 2 years now and besides making sure the oil is OK i didnt do much on it. I will change all the oils and filters this spring but im wondering if its a good idea to change the injectors and if that would help the...
Hello all
Im looking to get a Fransgard RV-390 tedder from a friend but he's telling me the pinion and crown wheel on one side are all worn out and he cant get replacement parts. That piece of equipment was on the farm when he bought it. He would give it to me free but i need to know if i can...
Hello all
Starting sometimes this past winter, the exhaust of my tractor smelled "different" then usual. And if the exhaust fumes are toward me as i operate the tractor then i get dizzy real fast. Its like the cumbustion isnt complete or something. Ill remove the air filter this weekend to...
Hello all
When i lower the back hydraulic of my ford 4000 (called The Smurf) it goes down to about 6 in from the ground and it goes up to about 2 feet. But i can lift it by hand another 8 inches. Is this normal? The bar is horizontal and adjusted to the highest position possible.
Thanks in...
Hello all
After the first snowfall which left us with a good 8 inch of snow up here in Quebec ive been using my tractor a lot moree but its so painfully slow to empty the bucket that its no fun at all. Theres enough fluid in the diferential and to move the bucket up and down the speed is...
Hello all
I bought my Ford 4000 and the previous owner said he had to use ether everytime it was below 35F or around 5C. And he never used it in the winter. I plan on putting a snowblower on it so it needs to start in very cold weather. Is there a block heater for that tractor? I put a...
Hello everyone
Baled about 100 bales this weekend with no problem until i broke 2 shearpins on the flywheel. As I was almost done i took the baler home and started going through every components i could think would need adjustment. The timing is right on and the knotter works perfectly. As i...
Hello again
I need a few parts for my 273 NH baler and since the closest dealer is 50 km away i was wondering if anyone know an online site i could order from here in Canada.
Thanks in advance
Hello all
We bought this baler last year and had a hard time while baling as the flywheel shear bolt kept breaking off. I read that it was probably the brake of the needles that were worn behond adjustment so i kept disengaging the PTO at each bale so the needle when coming back would not hit...
Hello again, Im kinda new to all this but id like to know if i can simply use chains behind my IH model 10 grain drill to cover up the seeds. We will be planting a mixture of hay, brome and other small seeds (for our horses) and i want to make sure im doing things right.
Thanks in advance
Hello all
I just bought an old grain drill IH model 10. The previous owner says its in working condition but id like at least a parts diagram in case i need to do some repair.
Thank you in advance for your help. Our 2 horses, our dunkey and the 2 alpacas thank you as well!!!