404nouser's latest activity

My personal cut won't do it, but the bigger machine I used last time. I just worked the bucket under the roots and moved the tree, then...

Flow spec for the 13 is 3-5 gpm, and the 17 is 5-8 gpm. Pressure is good but you're tractor won't flow enough to run the 17 well. Yes...

NPT to NPT | Hydraulic Adapters & Fittings | Hydraulics | www.surpluscenter.com Look at the female swivel ends, they have that type...

Looks like -6 npt

Put whip leads between the valve and coupler for a stopgap. Flexible is less prone to break when hit by the arm. Edit a pair of 2 wire...

I know someone that uses a bungee cord to hold the remote on one of his tractors

That's why I have a cab

I used a Hercules cordless grease gun. I used corn head grease.

Talk to your local rock quarry, sand quarry, or concrete company and see if you can get some old worn out conveyor belt. 24-36 inch wide...

I just used ATF and diesel

Many people use a bale on the back to ballast the one on the front

There's a good chance it won't have a low enough gear to run a tiller well. Many tractors from those years don't. A 6 foot rotary cutter...

All the loaders on tractors are weak and fragile. I won't be trying stumps with mine. I just get a bigger machine for removing stumps...

1. Depending on outside temperature and air flow those pressures could be good to a little high. 2. The condenser and receiver drier are...