350c's latest activity

1/2” is too much, my Exmark manual says 1/8”-1/4” depending on mowing conditions. If you’re mowing short regularly you want less rake...

The difference I've seen recommended is 1/8" to 1/4" higher in rear than front.

Kind of appears like the blades are not level side to side when cutting. Could be the deck but also check your tire pressures. Your...

I’d check the deck for level also. The blades do overlap in the way they cut, that’s why one blade in the middle is in front of the others.

Im surprised it lasted that long. I repair generators for a living, and you would not believe the number of these chepo Chinese...

I can understand why you didn't go that route!

What's your weight limit for mowing with tractor + MMM? That was a big factor for me, most of my property that I mow is in a flood...

I concur with the others. For row crop farming, gear drive. For everything else, HST. Once you use a HST tractor for a year doing...

Have you considered renting a skid-steer with an auger? One big advantage is the unobstructed visibility and control of the auger.

stucknutz, I agree. I've had both Kubota and JD and overall have found the JD to be better. For mowing, I currently have a Cub Cadet...

I replaced my John deere 455 garden tractor with 60" deck (older series than the X's) with a Kubota B2920 which is the next size up from...

I'm jealous of your terrain! Rotary mowers, which most refer to as bush or brush hogs, are primarily used for clipping/clearing ground...

Thanks for the reply. From my perspective, the additional strains on the much more expensive tractor, especially lighter SCUT and CUT...

I love my pull behind mower it doesn’t bounce around like a three point does with a cutting height of 6” to 8”, so the ride is better. I...

Hey Runner, I would think just the opposite--the u-joints would stay more in a straight position instead of having to flex up and down...